Product Overview
OneRTK Pro uses industry-class high-end high-precision satellite receivers, supports multi-frequency and multi-constellation, AIM+ anti-interference technology, and provides accurate and reliable heading data. 0.6cm+0.5ppm RTK accuracy, 0.15° heading accuracy, and the most advanced anti-interference technology, supports open service navigation message authentication technology, and provides end-to-end authentication functions on civil signals, making it anti-spoofing. It is an extremely cost-effective choice for mobile take-off and landing, surveying and mapping and other application scenarios!
Technical features:
-
It has interference detection and deception protection functions, and can automatically perform protection processing.
-
Able to eliminate multipath interference and distinguish direct signals from signals reflected from nearby structures.
-
Stable tracking is achieved in high vibration and shock environments.
-
Ionospheric scintillation monitoring and suppression capabilities.
-
Receiver Autonomous Integrity Monitoring.
Technical Parameters
| Satellite frequency band support |
789 hardware channels to simultaneously track all visible and supported satellite signals GPS: L1C/A,L1C, L2C, L2PY, L5 |
| Navigation refresh rate | 20Hz |
| Features | Anti-interference Anti-spoofing |
| RTK positioning accuracy | Horizontal: 0.6 cm + 0.5 ppm Vertical: 1 cm + 1 ppm |
| Single point positioning accuracy | Horizontal 1.2m Elevation 1.9m |
| DGNSS positioning accuracy | Level 0.4 Elevation 0.7m |
| Network port | none |
| Speed accuracy | 3cm/s |
| Directional accuracy | Antenna distance 1M: Heading 0.15° |
| Timing accuracy | xPPS out: 5ns Event accuracy < 20 ns |
| Base Station Mode | none |
| LOG/PPK records | none |
| Positioning time | Cold start < 45s Hot start < 20s Recapture 1s |
| Operating temperature | -20 to 85° C |
| Operating humidity | 5%-95%(non-condensing) |
| Data Protocol |
DroenCAN Protocol SBF NMEA 0183, v2.3, v3.03, V4.0 RTCM v3.x (MSM included) enter |
| Interface |
USB interface、uart(com2)、CAN interface、pps out、event |
| Compatibility | Compatible with ardupilot/PX4 |
| Voltage input | 4.8-5.2V |
| Weight | About 26g without antenna |
| Size | 58.2×41.2×12.5mm |
Pinout
